Swann SW231-WCH Wireless Analogue 2.4GHz OutdoorCam,
Night Vision 26ft/8m & Receiver, Black
I have a Raspberry pi3 and I want to connect to a Swann SW231-WCH
I am searching for the Swann SW231-WCH frequency.
Swann SW231-WCH Wireless OutdoorCam
2.4 GHz Wireless Color Camera
I do not know the frequency .... BUT I purchased a ACECO FC1003 frequency finder or scan
I DO NOT HAVE THE BASE .. BROKE
and
swan
Swann SW231-WCH Wireless Analogue 2.4GHz OutdoorCam, Night Vision 26ft/8m & Receiver, Black
About Swann SW231WCH
The Swann Wireless OutdoorCam wireless security camera is the perfect do-it-yourself wireless monitoring solution. This versatile camera has the ability to see during the day & in the dark at night up to 26ft (8m). Wireless OutdoorCam is weather resistant due to the sturdy metal casing.
'Plug & Play' convenience. Mount the camera in desired location, connect the receiver to your existing TV, VCR or Digital Video Recorder. The camera to receiver connection is 2.4GHz wireless transmission. No cables are used between the camera & receiver. Add an extra wireless camera to switch views using a 4 channel receiver. The Swann Wireless OutdoorCam is an versatile wireless surveillance solution for home or business.
Swann SW231WCH Features
380 TV Lines for clear image resolution
26ft (8m) infra-red night vision
Wireless 2.4GHz transmission between camera & receiver up to 165ft (50m)*
Sleek black styling on camera & receiver
Record video direct to your VCR or DVR
Sturdy weather resistant casing
Ideal entry-level solution for home or business
Raspberry PI 3
https://www.raspberrypi.org/forums/viewtopic.php?f=63&t=211837&p=1310381#p1310381
REPLY // Solution ::
Re: Pie AND Swan
Report this postQuote
Tue May 01, 2018 8:44 pm
I had a quick look around but didn't see any devices that could both receive 2.4GHz analogue video signal and convert the signal to a digital format to be passed via USB.
As I said earlier, you might get away with using a generic 2.4GHz analogue video receiver if the camera just puts a standard video signal onto a 2.4GHz carrier but there is no guarantee that it would work, you'd be hoping that Swann used an off-the-shelf transmitter/receiver and didn't play around with it to prevent this happening (and that the video signal transmitted is suitable, their receiver might be needed to do extra some extra format conversion).
These generic analogue receivers usually just take the video signal off the wireless carrier and output it via a composite connector suitable for plugging into a TV or monitor so you would then need a USB video capture device (one that is supported by linux) to take that signal and pass it to the RPi.
2.4 GHz is not synonymous with Wi-Fi.
https://en.wikipedia.org/wiki/List_of_2.4_GHz_radio_use#Video_devices
Night Vision 26ft/8m & Receiver, Black
I have a Raspberry pi3 and I want to connect to a Swann SW231-WCH
I am searching for the Swann SW231-WCH frequency.
Swann SW231-WCH Wireless OutdoorCam
2.4 GHz Wireless Color Camera
I do not know the frequency .... BUT I purchased a ACECO FC1003 frequency finder or scan
I DO NOT HAVE THE BASE .. BROKE
pie
swan
Swann SW231-WCH Wireless Analogue 2.4GHz OutdoorCam, Night Vision 26ft/8m & Receiver, Black
About Swann SW231WCH
The Swann Wireless OutdoorCam wireless security camera is the perfect do-it-yourself wireless monitoring solution. This versatile camera has the ability to see during the day & in the dark at night up to 26ft (8m). Wireless OutdoorCam is weather resistant due to the sturdy metal casing.
'Plug & Play' convenience. Mount the camera in desired location, connect the receiver to your existing TV, VCR or Digital Video Recorder. The camera to receiver connection is 2.4GHz wireless transmission. No cables are used between the camera & receiver. Add an extra wireless camera to switch views using a 4 channel receiver. The Swann Wireless OutdoorCam is an versatile wireless surveillance solution for home or business.
380 TV Lines for clear image resolution
26ft (8m) infra-red night vision
Wireless 2.4GHz transmission between camera & receiver up to 165ft (50m)*
Sleek black styling on camera & receiver
Record video direct to your VCR or DVR
Sturdy weather resistant casing
Ideal entry-level solution for home or business
Raspberry PI 3
https://www.raspberrypi.org/forums/viewtopic.php?f=63&t=211837&p=1310381#p1310381
REPLY // Solution ::
Re: Pie AND Swan
Report this postQuote
Tue May 01, 2018 8:44 pm
I had a quick look around but didn't see any devices that could both receive 2.4GHz analogue video signal and convert the signal to a digital format to be passed via USB.
As I said earlier, you might get away with using a generic 2.4GHz analogue video receiver if the camera just puts a standard video signal onto a 2.4GHz carrier but there is no guarantee that it would work, you'd be hoping that Swann used an off-the-shelf transmitter/receiver and didn't play around with it to prevent this happening (and that the video signal transmitted is suitable, their receiver might be needed to do extra some extra format conversion).
These generic analogue receivers usually just take the video signal off the wireless carrier and output it via a composite connector suitable for plugging into a TV or monitor so you would then need a USB video capture device (one that is supported by linux) to take that signal and pass it to the RPi.
2.4 GHz is not synonymous with Wi-Fi.
https://en.wikipedia.org/wiki/List_of_2.4_GHz_radio_use#Video_devices
No comments:
Post a Comment